This custom wall logo for Atlas General Contractors is made from ¼” thick stainless steel with a #304 brush texture applied to the surface. This is the same brush texture that is used on a lot of higher end modern appliances. The backs of each piece have a stud welded to them. To install, a paper template is taped in place and holes are drilled for each stud mount. Then it is just a matter of applying some silicone adhesive and inserting each letter’s studs into the holes. The result is a very modern, clean sign that has no exposed fasteners.
These types of signs can be made from a variety of materials, thicknesses, and sizes. Give Precision Sign & Design a call today at 918-430-1102 to find out more.
Double sided pole signs are excellent sign solutions that provide high visibility and long life expectancies. However, when an old business leaves and takes their panels with them, this leaves the internal electrical components open to the elements. Often, a sign that used to light up properly will need to be serviced for the new tenant/property owner.
In addition to installing the new sign faces (3/16” Polycarbonate panels with full color translucent vinyl graphics), we also serviced this cabinet by replacing the ballasts, lamps, sockets, and wiring. If your pole sign faces are damaged or missing, give Precision Sign & Design a call today at 918-430-1102. Replacing the faces sooner rather than later may save you the expense of replacing the internal electrical components!
Backlit pylon signs offer a great way to advertising your business. They are highly visible and often are near main roads with lots of exposure. To increase the lifespan of these signs, we typically use 3/16” polycarbonate panels that is extremely weather resistant and holds up well even in very high winds. Graphics can be done either with a digital print (3-5 year lifespan) or with cut translucent vinyl graphics that have a longer lifespan (7-9 years).
Give Precision Sign & Design a call today at 918-430-1102 to find out more about having your sign faces replaced.
Extreme weather can really wreak havoc on outdoor signs. This double sided, pole mounted, sign cabinet had one side completely blown out in a storm. The cabinet not only lost one side but the subsequent water damage ruined the ballasts, sockets, and most of the bulbs as well. Our technicians completely refurbished the electrical components and fabricated new sign faces with translucent vinyl graphics.
If your sign is not lighting up or has been damaged in a storm, give Precision Sign & Design a call today at 918-430-1102 and we’ll get you up and working again!